This cut-to-fit fabric is suitable for repairing and customising inflatable float tubes on Zodiac-type semi-rigid inflatable boats for boats over 6 metres long.

Discover the performance of our CSM/Neoprene hypalon® ORCA® 866 fabric, the best seller of all our fabrics with its thickness and resistance to all outdoor elements! You're guaranteed to get the best on the market.

It is also in this quality that the vast majority of finishes and colours are available, ensuring you real strength but also great freedom to customise your semi-rigid inflatable boat, available in smooth & carbon finish.

Caractéristiques techniques :

Base fabric: High Tenacity Polyester 1670 dtex - 1500 denier
Induction: Chlorosulphonated Polyethylene (CSM) / Polychloroprene (CR)
Masse surfacique : >1400 g/m²
Fabric width 145cm / Sold by the linear metre

Informations supplémentaires :

This fabric must be used with ORCA neoprene glue® Glue & an ORCA hardener®.
The price is shown exclusive of tax for 1 linear metre (100x145cm width).
Shipping within 72 hours is not guaranteed with this fabric category. A production or restocking delay may be necessary and will be communicated to you by email.
You can also use this fabric colle & hardener to apply a performing anti-scuff tape to protect your tyre from external aggression (rocks, rubbing ...).

ORCA FABRIC® 866 - PENNEL & FLIPO
Base fabric:	Polyester High tenacity 1670 dtex - 1500 denier
Coating :	Ext: Chlorosulfonated Polyethylene (CSM) /Polychloroprene (CR) Int: Polychloroprene (CR)
Specifications	Standard-Test	Direction	Result (Imperial)	Result (Metric)
Surfacic Mass	ISO 2286-2		46.2 oz/yd² ± 4.87	1,565 g/m² ± 165
Tensile Strength	ISO 1421 ASTM D 751 / B	CH (W) TR (F)	≥562 lbs/in ≥517 lbs/in	≥500 daN/5cm ≥460 daN/5cm
Tear Resistance	SO 4674-1 ASTM D 751 / B	CH (W) TR (F)	≥56.2 lbs ≥45.0 lbs	≥25 daN ≥20 daN
Permeability (Helium) Zeppelin Test	NFG 37 114			< 2.5 l/m²/24H
Peeling Test Adhesion	ISO 2411 ASTM D 751		≥16,85 lbs/in	≥15 daN/5cm
Low Temperature Resistance	NF EN 1876-2 ASTM D 751		≤- 4 °F	≤- 20 °C
Heat Aging 7 day at 158 °F (70°C)	NF EN 12280 - 1		Tensile strength unchanged
Hydrocarbon Resistance	ISO 1817		Tensile strength unchanged

Productos

Filtros

ORCA 828® Neopreno/CSM

ORCA 866® Neopreno/CSM

Dejemos que los clientes hablen por nosotros